Redox Sensor (Flow System Sensor)

The redox sensor uses a ceramic diaphragm that covers the whole measurement range from +2000 mV to -2000 mV.

The sensor is suitable for a pH range of 2 to 13 pH and has an accuracy of +/- 5 mV.

The specifications in the table refer to the standard redox sensor. The sensor can be modified to the customer´s needs regarding measuring range and accuracy. The response time is less than 60 seconds.

This sensor is also available in combination with a temperature sensor and as submersible sensor:

Item-Number	48 806 900 D0 A
Range	+2000 mV to -2000 mV
Accuracy	+/- 5 mV
Response time	< 60 seconds
Resolution	1 mV
Ambient temperature limit	Storage: -10°C to +60°C Operation: - 4°C to +60°C
Power supply	24 VDC, 2 W
Dimensions (widthxheightxdepth)	Sensor: 45x200x45 mm (without tube) DAM:* 75x55x70 mm
Weight	approx. 600 g (without tube)
Type of sensor/Measuring principle	Ceramic diaphragm
Protection class	IP 65
Interface	CAN-Bus

* Data Acquisition Module (DAM)

Redox Sensor (Submersible Sensor)

The redox sensor uses a ceramic diaphragm that covers the whole measurement range from +2000 mV to -2000 mV.

The sensor is suitable for a pH range of 2 to 13 pH and has an accuracy of +/- 5 mV.

This sensor is also available in combination with a temperature sensor and as submersible sensor:

Item-Number	48 806 900 T0 A
Range	+2000 mV to -2000 mV
Accuracy	+/- 5 mV
Response time	< 60 seconds
Resolution	1 mV
Ambient temperature limit	Storage: -10°C to +60°C Operation: - 4°C to +60°C
Power supply	24 VDC, 2 W
Dimensions (widthxheightxdepth)	Sensor: 60x200x60 mm DAM:* 75x55x70 mm
Weight	approx. 1000 g
Type of sensor/Measuring principle	Ceramic diaphragm
Protection class	IP 65
Interface	CAN-Bus

* Data Acquisition Module (DAM)

Broschure download